Construction Joint Sealing Products
Bentostrip
Colossus®Bentostrip is a hydrophilic joint sealant composed of natural sodium bentonite clay and butyl rubber. The Colossus® Bentostrip joint sealants are used for the waterproof sealing of construction joints in concrete. According to the type the sealant can be used in both fresh water and/or salt water applications, making the Colossus® Bentostrip joint sealants very versatile.
Very high expansion capacity (after submersion in freshwater > 400%) (after submersion in seawater > 200%)
Can be used in sea-, brackish and freshwater
No premature swelling
Easy to install
Environment friendly
Durable: average life bentonite > average life construction
not susceptible to high salt water pressure The initial concrete shrinkage can be easily captured by the Colossus®Bentostrip Joint sealants for fresh water only Joint sealants T (with special expansion retarding coating) BENTOSTRIP T 19 X 25 green 19 mm x 25 mm BENTOSTRIP T 20 X 10 black 20 mm x 10 mm Joint sealants for fresh and salt water (S types) BENTOSTRIP ST 19 X 25 red 19 mm x 25 mm Fastening profile (metallic) BENTONET 19 X 25 19 mm x 25 mm
Injection Tube
Colossus® Injection Tube is a Single – Walled tube based on PVC provided with opening or slot which become slightly conical from the inside to outside. The opening close due to their geometry and efficiently prevent cement paste from penetrating the transport canal. Colossus® Injection Tube are cut to the length required for their installation . Colossus® Injection Tube are very flexible and adapt perfect to any joint course.
The Individual tube is fitted in such a way that it lies in the construction joint formed during the concreting work. As soon as the concrete start to set it shrinks to form a joints around the injection tube which enables the resin to spread lengthwise. During the injection procedure the resin which is injected via the tube under pressure causes the opening of the slot and fill all existing cavities , gravels , nests and cracks in the joint area durably .
SwellSeal Mastic WA
Colossus® SwellSeal Mastic WA Caulk applied one-component grey polyurethane based , hydro swelling mastic for sealing smooth and rough construction joints and pipe. Penetrations in wet or underwater applications . Sealing of joints of in-situ cast concrete in wet and underwater applications. Sealing joints between precast segments in wet or underwater applications (e.g. manholes, box culverts, cable ducts and pipes) , Sealing of the locks between sheet piles. Solvent free.
Swellseal Mastic WA adheres to concrete, PVC, HDPE, steel, fibre glass, etc. In contact with water Swellseal Mastic WA will expand to about 200% of it’s original volume. Flexible system, which adapts to the irregular surface of the substrate. Easy application with a standard caulking gun. Durable: will exceed the construction’s life. Good chemical resistance. Colossus® SwellSeal Mastic WA supplied in cartridges and aluminium sausages