Sealing Tape Systems

Sealing Tape XP 100/200/300

NBR rubber elastic sealing tape . The tape exhibits excellent recovery characteristics and is fully silicone-compatible

Material Properties                 : NBR ( Acrylonitrilebutadiene Rubber)
Total Width                                : 100 mm / 200 mm / 300 mm
Thickness                                    : 1.2 mm
Shore A hardness                     : 65
Temperature Resistance      : – 20 º C to + 90 º C
Tensile Strength                       :  > 9.0 N/mm²  Lateral Direction
:  > 8.5 N/mm²  lengthwise Direction
Rapture Strain                          :  > 370 %  Lateral Direction
:  > 350 Lengthwise Direction
Moisture Vapour Transmission
Resistance coefficient µ       : 4500
Equivalent air thickness sd   : 5.4 m
Water pressure resistance     : 3 bar
Fire Class  (Din,EN)                  : B3 , F

Floor Packing PE / NV

Colossus Floor Packing is used to permanently waterproof ground drains. The packing is complete
embedded into the sealing compound.
Moisture vapour transmission resistance
coefficient: 1500 µ
Equivalent air thickness Sd: 0.9 m
Elongation: 57 %
Thickness: appr. 0.6 mm
Size : 350 x 350

Inside Corner PE / NV

Colossus Inside Corners is used as durable, watertight sealing in corners beneath ceramic layers. The Outside corners are embedded full surface in the sealing mass used.

Outside Corner PE / NV

Colossus Outside Corners is used as durable, watertight sealing in corners beneath ceramic layers. The Outside corners are embedded full surface in the sealing mass used.

Sealing Compound NV

Solvent-free sealing compound, ready for use and for being applied by brush, filler and roller. It is based on styrene-butadiene. After setting Sealing Compound is impermeable to water and silicone compatible. During application the product is odourless and dries rapidly.

Application temperature:                       + 5°C to +30°C
Viscosity:                                            15,000 mPa·s
Density:                                               1.55 kg/cm³
Solid content:                                       73 %
pH-value:                                              8.5
Dry layer thickness:                              0.8 mm
Wet layer thickness:                             1.1 mm

Sealing Compound PE

Solvent-free sealing compound, ready for use and for being applied by brush, filler and roller. It is based on styrene-butadiene. After setting Sealing Compound is impermeable to water and silicone compatible. During application the product is odourless and dries rapidly.

Application temperature:                       + 5°C to +30°C
Viscosity:                                            15,000 mPa·s
Density:                                               1.55 kg/cm³
Solid content:                                       73 %
pH-value:                                              8.5
Dry layer thickness:                              0.8 mm
Wet layer thickness:                             1.1 mm

Sealing Tape 120 NV

NBR rubber elastic sealing tape with low textile content and textile edging. The tape exhibits excellent recovery characteristics and is fully silicone-compatible

Material Properties                 : NBR ( Acrylonitrilebutadiene Rubber)
Carrier material                      : Polyester fleece laterally elastic
Total Width                            : 120 mm
Rubber width                          : 70 mm
Thickness                              : 0.6 mm
Material weight                       :  45 g/m
Surface                                  : Structurally embossed
Shore A hardness                   : 65
Temperature Resistance          : – 20 º C to + 90 º C
Tensile Strength                      :  > 1.0 N/mm²  Lateral Direction
:  > 5.9 N/mm²  lengthwise Direction
Rapture Strain                         :  > 526 %  Lateral Direction
:  > 36.7% Lengthwise Direction

Sealing Tape 120 PE

Polyethylene  elastic sealing tape with low textile content and textile edging. The tape exhibits excellent recovery characteristics and is fully silicone-compatible

Material Properties                 : Polyethylene
Carrier material                      : Polyester fleece laterally elastic
Total Width                            : 125 mm
Thickness                              : 0.3 mm
Surface                                  : Both Side fleece coating
Shore A hardness                   : 65
Temperature Resistance          : – 20 º C to + 90 º C
Tensile Strength                      :  > 9.0 N/mm²  Lateral Direction
:  > 8.5 N/mm²  lengthwise Direction
Rapture Strain                         :  > 370 %  Lateral Direction
:  > 350 Lengthwise Direction 

Wall Packing PE / NV

Colossus Wall Packing is suitable as permanently watertight sealing on wall areas for 1/2″ pipe passages of shower and bathtub water fittings under ceramic coverings. The packing is complete embedded into the sealing compound.

Moisture vapour transmission resistance coefficient: 1500 µ
Equivalent air thickness Sd: 0.9 m
Elongation: 57 %
Thickness: appr. 0.6 mm /0.8mm
Size : 100 x 100